![]() ![]() Ensure that your fan is off before doing this. Next, you’ll need to gain access to the set buttons on your Fan Controller installed inside the canopy of your fan. First, make sure your electricity is back on. Once that’s wired up, you’ll need to pair the keypad with the Fan Controller for it to work. Wiring an Insteon Keypad in the circuit for a ceiling fan using the Insteon Fan Controller This diagram from Insteon’s Fan Controller FAQs shows you how to wire the keypad: As always, turn off the power to the fan and the switch box before doing any electrical work. The keypad will not physically control the power to the fan. For this type of installation, you’re basically using the wiring in the switch box to permanently power both the fan and the keypad. You’ll want to install the keypad in place of the fan’s original switch. even used to sell pre-programmed keypads and button sets for this very purpose. Six-button keypads work best, because you’ll need buttons to dim or turn the light on and off and buttons to adjust the fan between three speeds and off. Any Insteon Keypad will work-the on/off relay and dimmer versions. So let’s address that situation first: replacing a standard fan on/off switch. If you have a wall switch for the fan, you can’t use it to control the speed or adjust the light of a fan using the Insteon Fan Controller. Code in many jurisdictions requires that ceiling fans be controlled by a wall switch or at least have a wall-switch cutoff. ![]() If you’re in the situation where you can’t control your fan at all now, that’s likely because you don’t have a wall switch for it. So if you have an Insteon device you’re not using-a keypad, remote, or switches-you could pair one or more of those with your fan controller manually. Kevin Tofel has a good write-up summarizing your options over at Stacey on IoT.īut do you? Do you really? Or do you just need to control your fan, somehow, from inside your house? Insteon devices, by design, can be grouped or paired to work together without an app or a hub. ![]() Universal Devices‘ ISY or Polisy, Home Assistant, Homebridge, HomeSeer, and others will all bring new life to your Insteon devices. What Are Your Needs?ĭo you need voice, away-from-home, or timed/scheduled control? If so, you may want to consider one of the alternative systems Insteon customers are turning to now. But before you go ripping out Insteon devices around your home-particularly those that are hard to replace in kind-take a moment to evaluate your needs. So what’s the difference? The Insteon Hub is required to use the Insteon apps, to set and run schedules, and in some cases to configure Insteon product settings. If you’re in this camp, know that it doesn’t have to end like this. Customers who relied on their apps alone to control their fans might feel out of luck. One of these products-the Insteon Ceiling Fan Controller-is among the few smart fan controllers available to consumers today. With no notice whatsoever, Insteon users found themselves with seemingly dead smart home products. Smartlabs’ recent demise and the resulting shutdown of its cloud services has Insteon customers scrambling. In this article, we go through the steps to bring new life to your Ceiling Fan Controller so you can control your fan and light from anywhere in your home. But you can still use your Insteon devices. Smartlabs' shutdown of Insteon left many customers in a lurch. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |